Global Leader in Hydraulic Tools and Technology

Enerpac is a global market leader in high pressure hydraulic tools, controlled force products and solutions for precise positioning of heavy loads. Enerpac manufactures products, from the smallest hydraulic cylinder to complete computer-operated lifting and positioning systems, to provide our customers with innovative solutions that increase productivity, are cost effective, and make work safer and easier to perform.

Cylinders, Lifting Products & Systems

A complete line of high quality hydraulic cylinders

  • General Cylinders
  • General Purpose Cylinders
  • Hollow Plunger Cylinders
  • High Tonnage Cylinders
  • Lock Nut Cylinders
  • Low Height Cylinders
  • Lightweight Cylinders
  • Pull Cylinders
  • Telescopic Cylinders
  • Climbing Jacks

Hydraulic Torque Wrenches

Precision bolting solutions for the most demanding applications.

We provide Hydraulic Torque wrenches that have a torque rating from 0-100,000 ft/lb. 
We provide both Standard and Low Clearance wrenches for all of your torque applications.

Calibrations to both hydraulic and manual torque wrenches are also done on premises.

  • Joint Assembly
  • Controlled Tightening
  • Joint Separation
  • Bolting Pumps, Ancillary Products

Synchronous  Lifting Systems

  • Personal computer based control unit with user-friendly Windows interface
  • Digital control of the lifting process accurate to + – .04” [1mm] between leading and lagging lifting points
  • Multiple lift point capability, from 2 to 24 points
  • Data recording, graphic presentations and print-out capability
  • Automatic stop at pre-set stroke or load limit

Integrated Solutions – Heavy Lifting

The Synchronous Hoist System is a below-the-hook sling adjuster (hydraulic turnbuckle) which typically includes multiple specialized hydraulic cylinders mounted directly in-line with the rigging which provides the operator the freedom to precisely monitor and adjust each lifting point independently. The system enables a single crane to precisely position heavy and unbalanced loads.

Pumps & Valves

Hydraulic pumps available in +1,000 different configurations

Hydraulic pumps and valves

  • Manual Pumps
  • Electric Pumps
  • Air Hydraulic Pumps
  • Gasoline Pumps
  • Directional Control Valves
  • Flow and Pressure Control Valves

System Components

Ensure efficient operation of a high pressure hydraulic system

Hydraulic system components

  • Hoses, Couplers, Oil
  • Manifolds, Fittings
  • Gauges, Accessories
  • Flow and Pressure Control Valves
  • Directional Control Valves

Specialty Tools

Tools designed for maintenance and production applications

  • Maintenance Sets
  • Punches
  • Lifting Wedges
  • Spreaders
  • Cutters
  • Bender Sets

Hydraulic Presses

Durable hydraulic presses for all workshop applications

  • Roll Frame Press
  • H Frame Press
  • Clamp and Arbor Press
  • Tension Meter and Load Cells
  • Press Accessories

Hydraulic Pullers

Wide range of high strength mechanical and hydraulic pullers

  • Master Puller Sets
  • Grip Puller Sets
  • Cross Bearing Puller Sets
  • Bearing Pullers
  • Bearing Cup Pullers
  • Posi Lock Pullers

Wheeled Jacks

Portable lifting systems for lifting heavy loads. The Pow’R-LOCK is a self-locking jack that performs automatic mechanical locking during lifting, lowering and holding.

The Pow’R-RISER is capable of lifting and lowering heavy loads. For safe mechanical cribbing of a lifted load, accessory Locking U-Rings can be placed around an extended piston.

Mechanical Actuators

Ideal for challenging screw jack applications

  • Machine Screw Actuators
  • Ball Screw Actuators
  • Accessories

Mining Tools

Reliable solutions that maximize productivity and mining safety

  • Pow’R-LOCK
  • Rail Alignment Tool
  • Toe Jack Kit
  • Lifting Jack

Hydraulic Strand Jacks

The strand jack lifting technique originates from the concrete post tensioning principle. A strand jack can be considered a linear winch. In a strand jack, a bundle of steel cables or strands are guided through a hydraulic cylinder; above and below the cylinder are anchor systems with wedges that grip the strand bundle. By stroking the cylinder in and out while the grips are engaged in the anchors, a lifting or lowering movement is achieved.

  • HSL3006, 34 Ton, Hydraulic Strand Jack
  • HSL7006, 79 Ton, Hydraulic Strand Jack
  • HSL20006, 225 Ton, Hydraulic Strand Jack
  • HSL30006, 337 Ton, Hydraulic Strand Jack
  • HSL50006, 562 Ton, Hydraulic Strand Jack
  • HSL1507, 17 Ton, Hydraulic Strand Jack
  • HSL4507, 51 Ton, Hydraulic Strand Jack
  • HSL6007, 67 Ton, Hydraulic Strand Jack
  • HSL10007, 112 Ton, Hydraulic Strand Jack
  • HSL20007, 225 Ton, Hydraulic Strand Jack
  • HSL30007, 337 Ton, Hydraulic Strand Jack
  • HSL45007, 506 Ton, Hydraulic Strand Jack

Enerpac Custom Products and Solutions

When your application is in need of more than a standard high-force hydraulic product, look no further than our Custom Products and Solutions team. 

Whether you’re looking for high-pressure cylinders, pumps with specific reservoir capacities, tensioners or torque wrenches to overcome space restrictions, or custom presses, we will design a custom product exactly to your requirements.

As the market leader in high-force hydraulic technology we can provide customers with the value-added services of custom design, manufacturing and field support. 

Enerpac Rentals

Unlike other rental options, WB Equipment gives you access to more of the latest technology and advanced systems, so you can get the right solution for every job. Plus, all of our equipment comes with a Ready-for-Use Warranty*.

Our Rental Business Manager will provide the local support you need, from rental tool selection to job completion.

Simply browse the WB Equipment to find the tool that best fits your project. Then, submit a rental request and you’ll promptly receive a quote from an Authorized Rental Business Manager.

Know what you need? 

SUPPLIERS

OTHER PRODUCTS by WB EQUIPMENT

Custom hydraulic cylinders and hydraulic jacks made to order. Huge inventory readily available. With loads from 1 – 2,000 tons and pressure rating of 100 – I0,000 psi we can make any hydraulic cylinder or hydraulic jack to your exact requirements. Whether it be single acting, double acting, lockout or centerhole let us provide you with the right jacking system to perform your task.

Custom power units and hydraulic pumps made to order. Electric, Gas, Diesel or Air Operated power units. Flow rates range from 1 GPM to 100 GPM. Our hydraulic pumps are available in over 1000 different configurations. They have a pressure rating of 10,000 psi.

Freyssi Flat Jacks are simple, practical devices for the civil or structural engineer wherever the application or control of large forces is required. Flat jacks are frequently used in the solution of unforeseen problems such as in remedial measures or structural additions.

The sensor extension is different from the Cylinder stroke value. The sensor extension is hooked to the load, and it has a value even when the Cylinder is collapsed. The potential applications of this system are numerous synchronized lifting levering, pushing, pulling and positioning using computer technology.of a synchronous lifting system 

The hydraulic press depends on Pascal’s principle: the pressure throughout a closed system is constant. One part of the system is a piston acting as a pump, with a modest mechanical force acting on a small cross-sectional area; the other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter tubing (which more easily resists pressure) is needed if the pump is separated from the press cylinder.

Power Team Monostrand Stressing Jacks are the most durable in the industry.

Monostrand Stressing Jacks suited for work on slab-on-grade where dirt, heat and high volume use take their toll.

Stressing jacks are mainly used on construction sites for stressing mono-strand anchors, and for the separate stressing of the strands of multistrand tendons.

We can provide customized jacking equipment to test driven piles from 1 -2000 tons. The systems can be manually, electrically or automatically controlled.

WB Equipment has delivered components for multiple jacking systems. Our knowledge of structural design, hydraulics, and automation means that we are capable of designing a complete jacking system with controls that allow for fully automated jacking and monitoring.

A hydraulic torque wrenchis a power tool designed to exert torque on a fastener to achieve proper tightening or loosening of a connection through the use of hydraulics. A torque wrench is applied to the nut either directly or in conjunction with an impact socket. Hydraulic torque wrenches apply a predetermined, controlled amount of torque to a properly lubricated fastener.

strand jack (also known as strandjack) is a jack used to lift very heavy (e.g. thousands tons or more with multiple jacks) loads for construction and engineering purposes.

Strand jacks can be used horizontally for pulling objects and structures, and are widely used in the oil and gas industry for skidded loadouts. Oil rigs of 38000 Te have been moved in this way from the place of construction on to a barge. Since multiple jacks can be operated simultaneously by hydraulic controllers, they can be used in tandem to lift very large loads of thousands of tons. Even the tandem use of two cranes is very difficult operation.

hoist is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or wire rope as its lifting medium.

The basic hoist has two important characteristics to define it: Lifting medium and power type. The lifting medium is either wire rope, wrapped around a drum, or load-chain, raised by a pulley with a special profile to engage the chain. The power can be provided by different means. Common means are hydraulics, electrical and air driven motors.

A jack, screwjack or jackscrew is a mechanical device used as a lifting device to lift heavy loads or to apply great forces. A mechanical jack employs a screw thread for lifting heavy equipment.

 

A hydraulic jack uses hydraulic power. The most common form is a car jack, floor jack or garage jack, which lifts vehicles so that maintenance can be performed. Jacks are usually rated for a maximum lifting capacity (for example, 1.5 tons or 3 tons). Industrial jacks can be rated for many tons of load.

Quick acting re-bar grips are available for pull out testing of reinforcing bars in concrete, (re-bar/reinforcement bars) used in construction of highways, bridges, and tunnels as well as rigging and other applications.

 

When used with hydraulic jack, user slips jack and grip over grouted re-bar and applies pressure to load. These re-bar grips come in sizes No. 4-18 and accommodate construction industry’s focus on repair, maintenance, and building of public infrastructure.

Custom made cylinders made to your specifications. All cylinders calibrated and traceable back to NIST. Centerhole,  locknut,  low height, single acting,  double acting,  long stroke.

  • 0-1500 tons
  • Centerhole sizes .75 inch to 15 inches
  • Stroke ½ inch to 10 feet


Enerpac is a global market leader in high pressure hydraulic tools, controlled force products and solutions for precise positioning of heavy loads. 

Work site solutions for stressing, lifting and surfacing for railroad maintenance.

  • Track Jacks
  • Rail Pullers
  • Lifting Jacks
  • Truck Jacks






Wide range of high strength mechanical and hydraulic pullers

  • Master Puller Sets
  • Grip Puller Sets
  • Cross Bearing Puller Sets
  • Bearing Pullers
  • Bearing Cup Pullers
  • Posi Lock Pullers